Architectural Foam Brick: Brick is the use of foam and foam cement mixing small particles condensed, with light, heat, noise, fire high-quality performance, but due to the use of small diameter sake greatly reduce the cost, non-load-bearing walls of the ideal products . Is an environmentally friendly, energy, materials and stable new wall materials. Use foam brick wall materials do buildings, built for two years after testing, good light, to meet national project quality, noise, energy, fire and other standards. Also non-load-bearing walls of brick. Features: 1, light weight, reduce building load: dry density 300-1200kg / m3; ordinary concrete 1 / 5-1 / 8. 2, insulation, heat insulation, sound insulation and excellent performance: its thermal conductivity 0.08-0.16w / mk, 24cm wall insulation capacity of 60dB, to meet the building's exterior, household building facades, household wall insulation, sound insulation requirements. 3, good compression performance: compressive strength greater than 0.5Mpa, the strongest strength up 10.5Mpa more. 4, good shock resistance: Since the foam blocks belong to a porous material having a large elastic modulus, so that it has a good impact load on the shock absorbing effect of dispersion, while the foam quality lightweight brick, effectively reduce the load of the building, the building Loads smaller seismic capacity of the stronger. 5, no cracking, long life: Foam brick hollowing cracking phenomenon does not occur without the use of a brush interface agent, prominent anti-aging properties, long service life. 6, water resistance: Foam brick material absorption is less than 22%, significantly different from the other wall materials.